Gas Block Connectors – Double
These push-fit connectors are used to connect microducts and offer a guaranteed gas-tight seal through a simple application after fibre installation. Not suitable for direct bury applications.
Features a transparent body for ease of visual inspection to ensure the tube is inserted correctly.
The internal profile design allows an unobstructed passage for the cable and is not affected by the internal diameter of the duct.
The connector is supplied with a tamper-proof locking clip which prevents accidental disconnection. Removal is easily achieved by pressing the collet inwards.
Features & Benefits
- Gas block tightening design
- Extensive range of cable seals
- Push-fit connection
- Transparent body
- Locking clips
- IP68 protection
- 15bar blowing pressure
- 20 years lifetime
- EN50411-2-8 compliant
Sizes
| Microduct ∅ | ||||||||||
| Cable Range ∅ (mm) | 4mm | 5mm | 7mm | 7→5mm | 10mm | 10→7mm | 12mm | 14mm | 16mm | 18mm |
| 0.5 → 2.5 | ■ | |||||||||
| 0.5 → 3.5 | ■ | ■ | ■ | |||||||
| 2.0 → 4.0 | ■ | |||||||||
| 3.0 → 5.0 | ■ | ■ |
■ |
■ |
■ | |||||
| 6.0 → 8.0 | ■ |
■ |
■ | ■ | ||||||
| 8.0 → 10.0 | ■ | ■ | ■ | |||||||
| 10.0 → 12.0 | ■ | ■ | ||||||||
| 9.0 → 12.0 | ■ | |||||||||
Options
- Locking clips
Certification
- EN 50411-2-8 Microduct connector specification
- EN60529 IP68
- EN 61386-22 Glow test at 750º
- En 61386-24 Conduits Systems underground
Certified by:
Installation:
- Indoor
- MDU
- SDU
Applications:
- FTTh
- MDU
- SDU
Datasheet