Microduct Connectors | Gas Block

CONNECTORS

Gas Block Connectors – Single

These push-fit connectors are for use at cable exit point to provide a gas tight seal between the microduct and cable. The gas blocking function operates by simple tightening. Not suitable for direct bury applications.

Featuring a transparent body for ease of visual inspection to ensure the tube is inserted correctly.

The internal profile design allows an unobstructed passage for the cable which is not affected by the internal diameter of the duct.

The connector comes supplied with a tamper-proof locking clip which prevents accidental disconnection. Removal is easily achieved by pressing the collet inwards

Features & Benefits

Gas block tightening design
Extensive range of cable seals
Push-fit connection
Transparent body
Locking clips
IP68 protection
15bar blowing pressure
20 years lifetime
EN50411-2-8 compliant

Sizes

	Microduct ∅
Cable Range ∅ (mm)	7mm	10mm	12mm	14mm	16mm	18mm	20mm
1.5 → 2.5	■	■	■	■	■	■
2.5 → 3.5	■	■	■	■	■	■
3.7 → 4.7							■
4.7 → 6.5							■
3.5 → 5.0	■	■	■	■	■	■
5.0 → 6.5	■	■	■	■	■	■
6.5 → 7.5	■
6.5 → 8.0		■	■	■	■	■
6.5 → 8.5							■
7.0 → 8.5		■
8.0 → 9.5			■	■	■	■
9.4 → 12.0						■