uPVC Cable Duct
Class 1 & 2 ENA TS 12-24
Radius uPVC Power Cable Duct is a high-quality solid wall pipe manufactured from unplasticised polyvinyl chloride (uPVC) used for cable protection in Power and Renewables networks.
A durable high-quality construction manufactured under an ISO 9001 : 2015 quality system and in accordance with ENA TS 12-24 Class 1 and Class 2 industry standards.
Each length is push-fit socketed as standard (IP4X) and complies with IP54. It is also available with an interference Ring Seal (IRS) socket compliant with IP68.
A full range of fittings is also available incl. bends, couplers, repair kits and hockey sticks.
Features & Benefits
- Durable and high quality
- High resistance to impact and compression (450N as standard at operating
temperature of 75°C for Class 1) - Efficient heat dissipation due to the high compression to wall thickness ratio, enables enhanced cable performance
- Push-Fit socket
- Ring Seal Socket option
What's ENA TS 12-24?
What is ENA TS 12-24
Class 1, 2, 3 ?
ENA is the Energy Networks Association which represents the cables and pipes Transmission and Distribution network operators for gas and electricity in the UK.
ENA TS 12-24 is the technical specification issued by the ENA for plastic ducts for buried electric cables and defines the essential performance requirements and limiting dimensions, colour and identification details for coiled and non-coiled, plain or corrugated wall, circular cross section, extruded plastic cable ducts.
Class 1, 2 & 3 ducts protect low, medium/high voltage cables operating at 11kV, 33kV and EHV up to 132kV.
Class 1+ 450N at 75°C
Class 1+ electric cable duct means that the ducting provides 450N compression strength at 75ºC and in addition, is manufactured from high grade PE100 material that satisfies the test requirements for pressure rating defined in Clause 16.6 of ENA TS 12-24. Manufactured in either black or red colour.
Class 1 450N at 75°C
Class 1 electric cable duct means that the ducting provides 450N compression strength at 75ºC. Manufactured in either black or red uPVC or HDPE.
Class 2 450N at 50°C
Class 2 electric cable duct means that the ducting provides 450N compression strength at 50ºC. Manufactured in either black or red uPVC or HDPE.
Class 3 450N at 23°C
Class 3 electric cable duct means that the ducting provides 450N compression strength at 23ºC. Manufactured in either black or red uPVC or HDPE.
Sizes
| Nominal O.D./ID (mm) | Push-Fit Socket | Ring Seal Socket |
| Class 1 ENA TS 12-24 | ||
| 88.9/81.9 |  |
|
| 110/102 | |
|
| 125/116 | |
|
| 160/150 | |
|
| 200/188 | |
|
| 250/237 | |
|
| Class 2 ENA TS 12-24 | ||
| 96.5/89 | |
|
| 110/103 | |
|
| 125/118 | |
|
| 160/151 | |
|
| 200/190 | |
|
| 250/239 | |
|
Standard Power colours:
Options
- Customer Specific Print
- O-Ring Sealing
Certifications
- Made in accordance with ENA TS 12-24 Class 1 & 2
- BSI Kitemark to BS EN 61386-24 : 2010
Certifications
- Made in accordance with ENA TS 12-24 Class 1 & 2
- BSI Kitemark to BS EN 61386-24 : 2010
