Gas Block Connectors – 10-25mm
These push-fit connectors are used at cable exit point to provide a gas-tight seal between the microduct and cable.
They are retro-fitable in design and can be fitted easily onto both new and existing installations.
Small and compact they can be installed in most situations even in hard-to-reach places. Not suitable for direct bury applications.
Features & Benefits
- Retrofit Gas block
- Compact design
- Extensive range of cable seals
- Gas and Watertight up to 0.50 bar
- Other versions available upon request
Sizes
| Microduct ∅ | |||||||
| Cable Range ∅ (mm) | 10mm | 12mm | 14mm | 16mm | 18mm | 20mm | 25mm |
| 1.5 → 2.5 | ■ | ■ | ■ | ■ | ■ | ■ | |
| 2.5 → 3.5 | ■ | ■ | ■ | ■ | ■ | ■ | |
| 3.7 → 4.7 | ■ | ||||||
| 4.7 → 6.5 | ■ | ||||||
| 3.5 → 5.0 | ■ | ■ | ■ | ■ | ■ | ■ | |
| 5.0 → 6.5 | ■ | ■ | ■ | ■ | ■ | ■ | |
| 6.5 → 7.5 | ■ | ||||||
| 6.5 → 8.0 | ■ | ■ | ■ | ■ | ■ | ||
| 6.5 → 8.5 | ■ | ||||||
| 7.0 → 8.5 | ■ | ||||||
| 8.0 → 9.5 | ■ | ■ | ■ | ■ | |||
| 9.4 → 12.0 | ■ | ||||||
Installation:
- Indoor
- MDU
- SDU
Applications:
- FTTh
- MDU
- SDU
